NEWS

Stainless steel wire mesh is a kind of the optimal level of 304, 304, 316L, 316L stainless steel wire SUS302 as raw materials through the plain, twill and dense weaving methods woven a wire mesh deep processing products.

What kind of stainless steel wire mesh can not produce? In general, stainless steel wire of the rough degree is less than the size of the mesh.

But if the size of the mesh less than the roughness of silk, for example 4 hole can weld coarse 3 cm?In general, large steel wire mesh machinery equipment room can't welding of this specification, is mainly due to the mesh density is big, the distance between the stigma and style of the machine is too tight, and roughness of steel wire is bigger, makes the machine can't operate properly.

So when the stainless steel wire mesh is equal to the thickness of stainless steel wire.For example, 5 mm thick 5 mm mesh can be woven?This to make stainless steel wire stainless steel wire mesh in the production of rolling bend ahead of time, usually is much more hard than ordinary wire stainless steel wire, the 5 mm wire rolling bend is difficult, so this kind of specifications of the stainless steel wire mesh does not need to be rolled.But due to the roughness of mesh is more than the mesh density, so, the specifications of the stainless steel wire mesh weaving is not possible.

4 mm thick 5 mm mesh can be woven, but because of the small mesh, mesh coarser, so, the specifications of the stainless steel wire mesh processing fee is very high.

Stainless steel wire mesh can be divided into: stainless steel square wire mesh, stainless steel dense mesh net (mat) super wide type mesh (1.2-1.2 meters of 5-8 meters) wide and big wire deformed mesh, special specifications can be customized to add according to user needs processing.

More information please click Maishi Welded Wire Mesh